Hybrid harness

Sizes	Neck (A-B)	Body (A-D)	Weight
2XS-XS	9,5″	18-20″	35-50 lb
S-M	10,5″	20-22″	45-55 lb
L-XL	11,5″	22-25″	55-75 lb
2XL-3XL	12,5″	25-28″	75-95 lb

* If you are unsure about which size to choose for your dog, please do not hesitate to contact us (service@nahak.ca). It is important to provide us with your dog's measurements (detailed below), weight, and breed (or a photo).

Sizing

We highly recommend using a flexible measuring tape as shown on the picture. While measuring your dog, make sure he stands up with a straight back. If your dog have a thick fur put pressure on the measuring tape to avoid overestimated measurements.

Step 1

Point A

POINT A is located at the junction of the dog's neck and shoulder blades. At this point, there's a hole where the finger can easily be inserted - this is exactly where POINT A is located.

Step 2

Point B

POINT B is located on the sternum bone (pointed bone under the dog's throat).

MEASURE AB is the neck measurement. It runs from POINT A (previously identified) to POINT B.

A-B measurement

The AB MEASUREMENT is not the neck circumference but only a half-circle from POINT A to POINT B.

There must be some tension in the measuring tape when you take the measurement.

If your dog's neck measurement is within + or - 0.5″ of the reference measurement indicated in the chart, this will not cause any problems when using the harness.

Step 3

Point D and A-D measurement

POINT D is exactly where the dog’s tail starts / detaches from his body.

MEASURE AD is the back measurement. It runs from POINT A (previously identified) to POINT D.

When taking this measurement, the dog must have the back as straight as possible so as not to distort the measurements. The measuring tape should be tight and slightly raised above the back (should not follow the curvature of the back).